Home   |   About Us   |   PHONE: 513.272.0500   |   E-MAIL: SALES@POSITROL.COM    Request a Quote   
Outside Diameter
Gripping ChucksInside Diameter
Expanding MandrelsFace Clamping
ChucksPitch Diameter
ClampingCompensating
ChucksFixtures, Cartridge
Arbors / ChucksChuck
ChangeSpecial
ApplicationsChuck
RepairNew
ProductsCase
Studies
513.272.0500
Positrol > All Categories > Product Applications 
 

Product Applications
Positrol offers the best selection in workholding. They have standard designs that have been developed over the past 50 years, along with an experienced engineering team. This allows Positrol to provide the right workholding for your application. Not just something that is on the shelf.

These Product Applications show the Positrol Workholding advantage along with the Company's committment to excellence.
  
Click on a Product to view details.

Request Information
2 Jaw Face Clamp Chuck

Swing Clamp Chuck Decreases Scrap




Increased Production: 250 pcs/shift
Scrap reduced: 715 pcs/month
Total Savings: $1700/ month

Part: Round Part 35 MM OD,  30 MM ID with a small flange.
Operation: Turn ID and face and hold the ID to 30.000 mm
Tolerances: ID size tolerance .021 mm, TIR runout of the flange over the OD of .05mm
Production Requirements: 13,000/Month
Part Issues: Part was slightly out ouf round before machining
Tried: Original method was to use a 3 Jaw chuck with pie jaws. Second attempt to use a quick change style collet chuck.

Recommendation: Spring ...

Drawdown Chucks

Drawdown Chuck Saves $4,000/M




Increased Production: 315 pcs/shift
Scrap reduced: 715 pcs/month
Total Savings: $4000/ month

Part: Internal sprocket with three flanges.
Operation: Machine flanges.
Tolerances: .170mm runout between the flange faces and the ID.
Production Requirements: 15,000/Month
Part Issues: .001mm of misloading (from machine automation) results in .0025mm of runout.
Tried: Original method was to use a 3 Jaw chuck, relying on machine automation to load the part square against the workstop.

Recommendation: Switch to Positrol Drawdown Chuck that centers and pulls back to ...

Chuck Change System

Chuck Change® ROI Less Than 6 Months




Time Savings: 2 hrs per change
ROI: Less than 6 months

Repeatability: .0002" at Connection
Changeover Time: 10 Minutes
Maintenance: None required. The contact faces must be kept clean.

Other Benefits: "Operators like the system now; their job is now much easier. Part quality has improved from the use of the proper workholding."



Positrol Workholding Superior Cincinnati Langlois City Machine Posi-nut
Site created by ThomasNet Web Solutions and powered by Navigator Platform
Positrol Workholding - Workholding That Works