Home   |   About Us   |   PHONE: 513.272.0500   |   E-MAIL: SALES@POSITROL.COM   Request a Quote   
Collet Chucks DecisionPull Back ChucksDead Length ChucksDuplex Collet Chucks"S" Style PadsTurrett Lathe Collet PadsMartin PadsModel A Finger Pad
513.272.1122
Superior Cincinnati  
 

Superior Cincinnati


Click on a category to drill down.

First Operation Collet Chucks

Dead Length Chucks


  • No part movement
  • Drawtube pull or push to actuate
  • Up to 6" bar stock capacity
  • Exclusive Centr-Adjust feature to centralize the chuck
  • Repeatability at chuck face .is 0005" T.I.R. or better
  • Uses Collet Pads or Solid Collets
  • Has provision for an internal workstop
  • Short length
  • Conventional Thru-Hole Collet Chucks

    Pullback Chucks


  • Pullback action
  • Drawtube actuated
  • Up to 4" bar stock capacity
  • Exclusive Centr-Adjust feature to centralize the chuck
  • Repeatability at chuck face is .0005" T.I.R. or better
  • Uses "S" Style, Martin Type or Turret Lathe Collet Pads
  • Master collet provided
  • Ideal for first operations and slug work
  • In stock
  • “S” Style Collet Pads

    “S” Style Collet Pads


  • Dovetail feature machined in the middle diameter of each segment
  • Clamp screw engages the dovetail feature to secure the pad segment(s) into the master collet
  • Used primarily on multi-spindle automatics and in some Collet Chucks
  • Designed to be changed without requiring the removal of the master collet from the chuck
  • Machinable Emergency Collet Pads available from stock
  • "S" Style Pads can be purchased in a variety of shapes, sizes and materials
  • Turret Lathe Collet Pads

    Turret Lathe Collet Pads


  • Threaded holes in the periphery of the middle diameter are used to secure the pads to the master collet
  • These pads were originally used on turret lathes, thus their name
  • Turret Lathe Pads are commonly used with Collet Chucks and collet pad top jaws
  • Machinable Emergency Collet Pads available from stock
  • Turret Lathe Pads can be purchased in a variety of shapes, sizes and materials
  • Martin Pads

    Martin Pads


  • Identified by square lugs threaded into the periphery of the ground diameter closest to the face of the master collet
  • By turning the set screws, the lugs expand into slots thus securing the pad to the master collet
  • Master collet allows changing of the pad(s) without removing the master from the spindle
  • Pads are primarily used on multi-spindle automatics but are used in some Collet Chucks
  • Machinable Emergency Collet Pads available from stock
  • Martin Type Pads can be purchased in a variety of shapes, sizes and materials
  • Jaw Chuck Pads

    Jaw Chuck Pads


  • Available for popular jaw chucks
  • Used in jaw chucks with collet pad top jaws
  • For chucks that have master jaws that accept standard Turret Lathe Collet Pads
  • Increases flexibility of jaw chucks by eliminating wasted time spent on jaw change over
  • Offered in distinctive bidirectional serrated design to accommodate various stock diameters within working range of the chuck
  • Machinable Emergency Collet Pads available from stock
  • Jaw Chuck Pads can be purchased in a variety of shapes, sizes and materials
  • Collet Chuck Pads

    Collet Chuck Pads


  • Manufactured for use in all Superior Cincinnati Collet Chucks
  • Also available for many other manufacturer's Collet Chucks
  • Designed for bar and chucking work, available from stock with up to 6" chuck capacity
  • Machinable Emergency Collet Pads available from stock
  • Collet Chuck Pads can be purchased in a variety of shapes, sizes and materials
  • Feed Finger Pads

    Feed Finger Pads


  • Seated in the recess within the master feeder
  • One pad has a slot for engaging a key of the master feeder to eliminate pad rotation
  • For maximum wear the Feed Finger Pads are hardened
  • Pads are quickly and easily changed
  • Feed Finger Pads can be purchased in a variety of shapes, sizes and materials
  • CDD Duplex Collet Chucks

    CDD Duplex Collet Chucks

    (6)
    • Close repeatability a distance from the face of the chuck-
    • Extended grip length-Able to grip on two diameters
    • No pullback action
    • True parallel grip = More gripping force
    • Drawtube push to actuate
    • Up to 2" bar stock capacity
    • Full .063" clamping range
    • Exclusive Centr-Adjust feature to centralize the chuck
    • Repeatability at chuck face is .0005" T.I.R. or better
    • Uses Turret Lathe Collet Pads
    • Helps prevent vibration due to bar whip
    • In stock
    • Sealed design - No exposed mating surfaces
    Positrol WorkholdingSuperior CincinnatiLangloisCity MachinePosi-nut
    Site created by Thomas Web Solutions and powered by Navigator Platform
    Superior Cincinnati