Home   |   About Us   |   PHONE: 513.272.0500   |   E-MAIL: SALES@POSITROL.COM    Request a Quote   
Outside Diameter
Gripping Chucks
Inside Diameter
Expanding Mandrels
Face Clamping
Chucks
Pitch Diameter
Clamping
Compensating
Chucks
Fixtures, Cartridge
Arbors / Chucks
Chuck
Change
Special
Applications
Chuck
Repair
New
Products
Case
Studies
513.272.0500
Positrol > Inside Diameter Expanding Mandrels & Expanding Collets > Expanding Mandrels > Hi-Torque Flanged Collet Arbor Assembly > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Hi-Torque Flanged Collet Arbor Assembly

Check up to five results to perform an action.

Application:

• Used primarily for gantry or robot load applications.
• Has more expansion/load clearance than typical collets.
• Used where high gripping forces are required.
• Widely used for small diameters under .50 inch.
• Permits gripping to the full length of blind bores.
• Up to three times the gripping force of other collet arbors.
• Pull back action for length control.
• Work stops are designed to suit individual applications.
• Repeatability: .0005" T.I.R.





Compare Items
   
  Results 1 - 13 of 13 1 

Item #

Actuation

Flange Assemblies

Range

Maximum Expansion

Loading Clearance

Max Part Tolerance

4-ATFPGI-1 Drawbar 4.00 in .25-.53 in 0.014 in 0.0030 in 0.0100 in
4-ATFPGI-2 Drawbar 4.00 in .38-.75 in 0.016 in 0.0030 in 0.0120 in
4-ATFPGI-3 Drawbar 4.00 in .50-1.00 in 0.020 in 0.0040 in 0.0150 in
4-ATFPGI-4 Drawbar 4.00 in .75-1.56 in 0.030 in 0.0040 in 0.0250 in
4-ATFPGI-5 Drawbar 4.00 in 1.06-2.12 in 0.035 in 0.0050 in 0.0290 in
6-ATFPGI-1 Drawbar 6.50 in .25-.53 in 0.014 in 0.0030 in 0.0100 in
6-ATFPGI-2 Drawbar 6.50 in .38-.75 in 0.016 in 0.0030 in 0.0120 in
6-ATFPGI-3 Drawbar 6.50 in .50-1.00 in 0.020 in 0.0040 in 0.0150 in
6-ATFPGI-4 Drawbar 6.50 in .75-1.56 in 0.030 in 0.0040 in 0.0250 in
6-ATFPGI-5 Drawbar 6.50 in 1.06-2.12 in 0.035 in 0.0050 in 0.0290 in
6-ATFPGI-6 Drawbar 6.50 in 1.50-3.19 in 0.040 in 0.0100 in 0.0290 in
6-ATFPGI-7 Drawbar 6.50 in 2.00-4.25 in 0.050 in 0.0120 in 0.0370 in
8-ATFPGI-8 Drawbar 8.25 in 3.00-6.00 in 0.060 in 0.0150 in 0.0440 in
  Results 1 - 13 of 13 1