Home   |   About Us   |   PHONE: 513.272.0500   |   E-MAIL: SALES@POSITROL.COM    Request a Quote   
Outside Diameter
Gripping Chucks
Inside Diameter
Expanding Mandrels
Face Clamping
Chucks
Pitch Diameter
Clamping
Compensating
Chucks
Fixtures, Cartridge
Arbors / Chucks
Chuck
Change
Special
Applications
Chuck
Repair
New
Products
Case
Studies
513.272.0500
Positrol > Outside Diameter Gripping Chucks > First Operation Collet Chucks > Conventional Thru-Hole Collet Chucks > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Conventional Thru-Hole Collet Chucks

Check up to five results to perform an action.

  • Repeatability within .0005" TIR as standard.
  • Pull-back clamping action.
  • Capable of gripping on hot rolled stock.
  • Uses "S" style collet pads



  • Compare Items
       
      Results 1 - 15 of 15 1 

    Item #

    Collet Number

    Maximum Round Bar Capacity

    Maximum Hexagon Bar Capacity

    Maximum Square Bar Capacity

    Chuck Nose Diameter

    Spindle Nose

    CDS-16-A05 1216 1.62 in 1.41 in 1.16 in 4.00 in A05
    CDS-16-A06 1216 1.62 in 1.41 in 1.16 in 4.00 in A06
    CDS-16-A08 1216 1.62 in 1.41 in 1.16 in 4.00 in A08
    CDS-22-A05 1222 2.25 in 1.94 in 1.56 in 4.86 in A05
    CDS-22-A06 1222 2.25 in 1.94 in 1.56 in 4.86 in A06
    CDS-22-A08 1222 2.25 in 1.94 in 1.56 in 4.86 in A08
    CDS-26-A05 1226 2.62 in 2.25 in 1.84 in 5.25 in A05
    CDS-26-A06 1226 2.62 in 2.25 in 1.84 in 5.25 in A06
    CDS-26-A08 1226 2.62 in 2.25 in 1.84 in 5.25 in A08
    CDS-30-A05 1230 3.00 in 2.59 in 2.09 in 6.00 in A05
    CDS-30-A06 1230 3.00 in 2.59 in 2.09 in 6.00 in A06
    CDS-30-A08 1230 3.00 in 2.59 in 2.09 in 6.00 in A08
    CDS-40-A06 1240 4.00 in 3.43 in 2.81 in 7.75 in A06
    CDS-40-A08 1240 4.00 in 3.43 in 2.81 in 7.75 in A08
    CDS-40-A11 1240 4.00 in 3.43 in 2.81 in 7.75 in A11
      Results 1 - 15 of 15 1