Home   |   About Us   |   PHONE: 513.272.0500   |   E-MAIL: SALES@POSITROL.COM    Request a Quote   
Outside Diameter
Gripping Chucks
Inside Diameter
Expanding Mandrels
Face Clamping
Chucks
Pitch Diameter
Clamping
Compensating
Chucks
Fixtures, Cartridge
Arbors / Chucks
Chuck
Change
Special
Applications
Chuck
Repair
New
Products
Case
Studies
513.272.0500
Positrol > Face Clamping Chucks > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Face Clamping Chucks

Check up to five results to perform an action.

Higher Quality Parts
  • Thin walled, irregular, or out-of-round parts can be clamped for turning, milling and grinding without distortion
  • Out-of-flat parts can be clamped evenly on all points which will eliminate deformation
  • Parts can be centralized by collets to positively secure the part or by straight/tapered pins
  • Jaw quantity and position are designed to clamp the part in the optimum locations
  • Air sensing capable to ensure that the part is located against the workstop to maintain parallelism

    More Throughput
  • Better quality parts decreases scrap rate
  • Workstops are designed to suit multiple parts to eliminate changeover
  • Thru spindle coolant capability prevents chip build up for nonstop production

    Increase Uptime and Decrease Cost
  • Sealed against contamination for continuous use
  • All components are hardened and ground for long life to decrease repair costs





 DOWNLOADS 

Swing Clamp Brochure
(PDF, 623KB)

Compare Items
   
  Results 1 - 9 of 9 1 

Item #

Number of Jaws

Capacity Diameter

Outside Diameter

Length

Chuck Weight

Max Drawbar Force

Drawbar Stroke

Max Speed

Item Name

7500-008-2000 2 4.25 in 108 in
8.25
7.10 75 lb 4000 lbf .85 in 3000 rpm 8" Swing Clamp Chuck 2-Jaw
7500-008-3000 3 4.25 in 8.25 in 7.10 in 75 lb 4000 lbf .85 in 3000 rpm 8" Swing Clamp Chuck 3-Jaw
7500-008-4000 4 4.25 in 8.25 7.10 75 lb 6000 lbf .85 in 3000 rpm 8" Swing Clamp Chuck 4-Jaw
7500-010-2000 2 5.5 in 10.00 7.85 120 lb 6000 lbf .85 in 2400 rpm 10" Swing Clamp Chuck 2-Jaw
7500-010-3000 3 5.5 in 10.00 7.85 120 lb 9000 lbf .85 in 2400 rpm 10" Swing Clamp Chuck 3-Jaw
7500-010-4000 4 5.5 in 10.00 7.85 120 lb 9000 lbf .85 in 2400 rpm 10" Swing Clamp Chuck 4-Jaw
7500-012-2000 2 6.75 in 12.00 8.31 180 lb 9000 lbf .83 in 2000 rpm 12" Swing Clamp Chuck 2-Jaw
7500-012-3000 3 6.75 in 12.00 8.31 180 lb 12000 lbf .83 in 2000 rpm 12" Swing Clamp Chuck 3-Jaw
7500-012-4000 4 7.00 in 12.00 8.31 180 lb 9000 lbf .83 in 2000 rpm 12" Swing Clamp Chuck 4-Jaw
  Results 1 - 9 of 9 1